Manufacturer & Exporter of Ferrous & Non-Ferrous Components.

background

Air Dryer

Air Dryer


Leading manufacturers of Compressed Air Dryer. Customised Package. Substantial Capacity. These dryers worked on the principle of compressed air with saturated water vapor that enters the dryer's pre-cooling device. This air is cooled down with outgoing cold air, thus reducing the load of the system.

Desiccant Air Dryer (Heatless Type)

Condensate moisture along with oil and dust particles for downstream application is a major problem. The only way to remove these unwanted contaminants (Heatless) dryer is a complete purification package, it includes filtration plus drying.

  • Filtration: Before drying, wet air enters Pre Filter in series. i,e first air enters into pre filter of sintered bronze element and removes all major dust particles along with big droplets of moisture and oil. The air flow direction in this PF is from out to In. This will help to reduce early chocking from major particles. In Second stage fitter (MF) micro filter which is made up of micro glass fiber removes mist form of moisture and oil along with small dust particles up to 0.2p. This type of filter enhances the life of solenoid valves and increases life of desiccant in the drying tower.
  • Drying: After pre filtration only vapour content of moisture which is major contribution in the air will enter into desiccant towers. Both towers are totally filled up with desiccant and type of desiccant depends upon desired dew point required for application. Solenoid valves are controlled by the control panel (Timer based).At the initial stage both towers will remain open for 15 seconds to bring both towers in pressurized mode. After pressurized mode one tower will be in drying mode to adsorb vaporized moisture and second tower will be in regeneration mode. The total cycle time will be of 10 min. To remove minute particles after dryer, dust filter is adopted at the outlet of dryer.The quality of air at the std. dryer

Standard Models at 7Kg/cm2

Sr. No. Capacity End Connection Overall Dimensions in mm Approx.
1. 10 CFM 1/2" BSPT (F) 750 x 400 x 1100
2. 15 CFM 1/2" BSPT (F) 850 x 400 x 1500
3. 20 CFM 1/2" BSPT (F) 850 x 400 x 1750
4. 25 CFM 1/2" BSPT (F) 850 x 400 x 1800
5. 30 CFM 1/2" BSPT (F) 850 x 500 x 1850
6. 40 CFM 3/4" BSPT (F) 900 x 500 x 1900
7. 60 CFM 3/4" BSPT (F) 1000 x 500 x 1950
8. 80 CFM 1" BSPT (F) 1150 x 600 x 2000
9. 100 CFM 1" BSPT (F) 1200 x 600 x 2100
10. 120 CFM 1" BSPT (F) 1250 x 600 x 2100
11. 150 CFM 1 1/2" BSPT (F) 1250 x 650 x 2100
12. 200 CFM 1 1/2" FLGD ASA 150# 1250 x 650 x 2100
13. 250 CFM 1 1/2" FLGD ASA 150# 1250 x 700 x 2150
14. 300 CFM 1 1/2" FLGD ASA 150# 1400 x 800 x 2150
15. 400 CFM 2" FLGD ASA 150# 1600 x 800 x 2150
16. 500 CFM 2" FLGD ASA 150# 1800 x 1000 x 2200
17. 800 CFM 3" FLGD ASA 150# 2000 x 1050 x 2200
18. 1000 CFM 4" FLGD ASA 150# 2200 x 1200 x 2200
19. 1500 CFM 4" FLGD ASA 150# 2400 x 1500 x 2250

Refrigerated Air Dryer

The wet compressed air enters in to compact three in one heat exchanger (Economizer,Evaporator & Moisture Separator) for pre cooling and passes through moisture separator and separates condensate and will be discharged by auto drain valve. The cooled and dried compressed air will return through heat exchanger and passes through outlet.

Key Features

  • Compact Three-in-One heat exchanger.
  • Aluminium plate finned cross flow heat exchanger.
  • Reliable refrigerated compressor having eco-friendly refrigerant, low noise level/less power consumption
  • Total modular canopy design, interchangeability, easy fitment of all components and the data from microcontroller ensures preventive Maintenance and easy serviceability
Technical Specification
Airflow Max. Op. Pressure Power Supply Version Line Size End Conn.
m3/min cfm Kg/cm2 psi V/Ph/Hz L W H
0.57 20 12 171 230/1/50 Air Cooled 1/2" BSPT (F) 480 400 625
1.13 40 12 171 230/1/50 Air Cooled 3/4" BSPT (F) 480 400 625
1.7 60 12 171 230/1/50 Air Cooled %" BSPT (F) 480 400 625
2.27 80 12 171 230/1/50 Air Cooled 1" BSPT (F) 680 560 850
2.83 100 12 171 230/1/50 Air Cooled 1" BSPT (F) 680 560 850
3.54 125 12 171 230/1/50 Air Cooled 1'/2" BSPT (F) 680 560 850
4.25 150 12 171 230/1/50 Air Cooled 11/2" BSPT (F) 680 560 850
5.66 200 12 171 230/1/50 Air Cooled 1 A" BSPT (F) 750 650 1000
7.08 250 12 171 230/1/50 Air Cooled 1%2" BSPT (F) 750 650 1000
8.49 300 12 171 415/3/50 Air Cooled 2" FLGD ASA 1504 950 850 1250
9.91 350 12 171 415/3/50 Air Cooled 2" FLGD ASA 1504 950 850 1250
12.74 450 12 171 415/3/50 Air Cooled 2" FLGD ASA 1504 950 850 1250
15.57 550 12 171 415/3/50 Air Cooled 2 "A" FLGD ASA 1504 1000 900 1400
18.41 650 12 171 415/3/50 Air Cooled 2 /2" FLGD ASA 1504 1000 900 1400
21.24 750 12 171 415/3/50 Air Cooled 2 /2" FLGD ASA 1504 1000 900 1400
25.48 900 12 171 415/3/50 Air Cooled 3" FLGD ASA 1504 1250 1000 1550
28.32 1000 12 171 415/3/50 Air Cooled 3" FLGD ASA 1504 1250 1000 1550
31.15 1100 12 171 415/3/50 Air Cooled 3" FLGD ASA 1504 1250 1000 1550

Other Manufacturing Range

Coalescing Filters

Filter Elements

Moisture Seperator

After Cooler

Pressure Vessels (Air Receiver)

Duplex Filter


Application Industry

Powder Coating /Spray Painting

Pharmaceutical Industries

Automobile Industries

Engineering Industries

Textile

Dairy Industries

Plastic Industries

Sugar Industries

Power Sector

Hospitals

Chemical Industries

Breweries Industries